MOD. T.NV-2S

Automatic bobbin change possible by

ELECTRONIC SINGLE-WIRE DEVICE mod. U-E 250
U = single-wire
E = electronic
250 = bobbin length 250 mm – diameter 33 mm

• Adjustable speed:0 – 180 beats/min (depending on weaving width)
• Weaving width: nominal loom height up to 2,500 mm

Accessories

Cranking Machines ON 60 - ON 80 - ON 120

• ON 60 Cranking Machine: Wire diameter R1400 Nm², min. diameter 1 mm - max. 5 mm
• ON 80 Cranking Machine: Wire diameter R1400 Nm², min. diameter 3 mm - max. 8 mm
• ON 120 Cranking Machine: Wire diameter R1400 Nm², min. diameter 4 mm - max. 12 mm

SUITABLE FOR WEAVING

• Gear diameter min. 170 - max. 220 mm.
• Motor with frame-synchronized speed control.
• Cranking speed from 0 to 120 m/min.
• PLC control with speed, acceleration, and deceleration settings.
• Control panel with display for speed, acceleration, and deceleration.
• Numeric keypad for programming.
• Setting of the number of wires to be crimped with stop function when the preset number is reached.
• Counter of crimped wires with stop function when the programmed number is reached.